| |
| Scrub bottom clean at haul-out. Repaint only if old paint is sound and tight. If not, remove the old coating. Sand with 80 - 120 grit sandpaper. |
Dewax by using the Dewaxer. Remove and dissolve wax at once with clean paper towels or a rag. Repeat. Sand hard to a dull finish with 80 - 100 grit sandpaper. Fill any chips with KBS NuFill Epoxy Putty. Dry. Sand. |
If seams are not flush, fill them with seam compound. Dry several days until skin forms. Do not sand. Fill nicks with KBS NuFill Epoxy Filler. Dry. Sand. |
Sandblast surface to a near white metal. Remove blast residue with a broom and air hose. Wipe off with Dewaxer. Do not sand. Fill any imperfections with Fair Compound. Sand smooth and wipe clean |
| Prepare seams, nicks, and chips. Spot coat any scuffs with antifouling. |
Apply 1-2 coats of Bottom Protect Sealer. Sand with 80 grit sandpaper. Wipe down with Dewaxer. Apply 4-5 coats of Bottom Protect Primer. |
Apply reduced antifouling (about 10% with Reducer) for 1 full coat. |
Solvent wash with Dewaxer. Apply 4-5 coats of Bottom Protect Primer. |
| Apply 2-3 coats of antifouling bottom paint. |
Apply 2-3 coats of antifouling bottom paint. |
Apply 2-3 coats of antifouling bottom paint. |
Apply 2-3 coats of antifouling bottom paint. |
